Omron V640-HS61, Руководство пользователя, Страница: 20 / 174

18
SECTION 1
Sys
te
m Conf
igura
tion
CIDRW System
User’s Manual
SECTION 1
Product Outline
System Configuration
When SECS Is Used
Communications with the host device is possible using the SECS protocol.
When SECS Is Not Used
Communications with the host device follow the OMRON proprietary protocol.
The Amplifier Units are connected directly to the host device without using a CIDRW Controller.
Refer to the following page for connection examples for more than one Amplifier Units or for connection examples for
using the V700-L11 Link Unit.
page 126
Using Link Units (V700-L11) to make connections makes it possible to remove and replace just the rele-
vant Amplifier Unit while leaving the power to the CIDRW system on in the event of a failure or during
maintenance.
The CIDRW Heads are the
antennas for reading the
carrier IDs from the ID Tags
and writing the carrier IDs.
The Amplifier Units con-
trol the CIDRW Heads.
This is a host computer,
equipment controller, etc.
CIDRW Head
V640-HS61
Amplifier Unit
V640-HAM11-V4
CIDRW Controller
V700-L22 or V700-L22-V2
Host
Multiple Amplifier Units
are controlled in
response to commands
(SECS) from the host
device.
RS-232C
SECS
I/II
RS-232C
CIDRW Head
V640-HS62
Amplifier Unit
V640-HAM11-L-V2
CIDRW Controller
V700-L22 or V700-L22-V2
Host
RS-232C
SECS
I/II RS-232C
The CIDRW Heads are the
antennas for reading the
carrier IDs from the ID Tags
and writing the carrier IDs. The Amplifier Units con-
trol the CIDRW Heads. This is a host computer,
equipment controller, etc.
CIDRW Head
V640-HS61
Amplifier Unit
V640-HAM11-V4
Host
RS-232C
OMRON proprietary
protocol
CIDRW Head
V640-HS62
Amplifier Unit
V640-HAM11-L-V2
Host
RS-232C
OMRON proprietary
protocol