Omron V640-HS61, Руководство пользователя, Страница: 59 / 174

57
CIDRW System
User’s Manual
SECTION 3
Set
ting t
h
e Communica
tions
Cond
it
ions for the
CIDR
W
Controll
er
SECTION 3
Preparing for Communications
1.
Specify the parameters to be changed.
When the first parameter is specified, the ALARMS indicator flashes.
2.
Confirm the parameter change.
The input parameter is checked and written.
 Check for Correct Setting
The currently set data can be output so that you can check if it is correct.
1.
Send the parameter output command "::GET_E99SYS"
from the host device.
The carrier ID settings are displayed.
Do not change operation parameters other than RT, CIDOF,
and CIDLN.
This can cause the system to stop operating correctly.
For the V700-L22-V2, the “NVASC” parameter is added
to the end.
Change Data Segment Area
The data segment area (memory map) must be changed to communicate with ID Tags (RI-TRP-DR2B,
made by Texas Instruments). The procedure for changing the data segment area is explained here.
ID Tag Memory Maps Refer to page 159.
The commands, and the parameters that can be set, are indicated below.
CIDOF=00
CIDLN=16
::END
_
::GET_E99SYS
RT=10.0
CT=0.1
RTY=3
DINST=
MENT=
MODEL=L22
HREV=001.04
CIDOF=00
CIDLN=16
::END
_
V700-L22 Operation Example
RT=10.0
CT=0.1
RTY=3
DINST=
MENT=
MODEL=L22V2
HREV=001.00
CIDOF=00
CIDLN=16
NVASC=NOM
::END
V700-L22-V2 Operation Example