Omron V640-HS61, Руководство пользователя, Страница: 112 / 174

110
SEC
TION 5
When SECS Is Used
CIDRW System
User’s Manual
SECTION 5
Troubleshooting
 Setting Mode
• Operating Normally in the Setting mode
Terminal Initial Display of the Host Device after Startup in the Setting mode
Terminal Display When Parameter Setting Has Been Completed without Error
Indicators
POWER OPERATING ALARMS BUSY ERROR
Error occurrence
All indicators lit
or flashing?
POWER indicator
OFF?
No
Yes
No
Yes
An error has occurred in the CIDRW Controller power supply.
Check the power supply of the CIDRW Controller.
An error has occurred at the CIDRW Controller.
Check the status of the indicators.
When all the indicators are lit or flashing Refer to page
111.
Check if the CIDRW Controller settings are correct.
When the CIDRW Controller fails to respond to messages sent to it Refer to page 111.
When an Error Unrelated to Message Transmission and Responses Occurs Refer to page 111.
SETUP_START <L22 ><XXX.XX, YYY.YY>
_
Software Revision Level
Model number
Hardware Revision Level
SETUP_COMPLETE
_