Omron V640-HS61, Руководство пользователя, Страница: 165 / 174

CIDRW System
User’s Manual
SE
C
TION
6
SECS Prot
oco
l Spe
cifica
tions
SECTION 6
Appendix
163
• Storing
The method for storing in the BUSY status, e.g., because the internal buffer is full, is to use NAK trans-
mission.
• Processing for Time-out Detection
At T3 and T4 time-outs, the time-out is notified by the S9F9 message.
• SECS Parameters
Support Attributes
Item Default setting Range Setting Unit
Double block detection yes/no 1 1: The header of the block currently being received is
compared with the correct block received immediately
before, and double blocks are detected.
0: Double block detection is not performed.
-
Source ID 0 0 to 32767 1
Single block No. 1 0, 1 -
CIDRW Attribute Definitions
Attribute names Description Access
Re-
quest
Format and mounting
Basic items Configuration Number of CIDRW Heads RO Y 20 "00"-"31"
The number of Heads connected
when the system power is turned
ON (automatic recognition)
AlarmStatus Substate of current CIDRW
alarms RO Y 20
"0" = no alarm
"1" = alarm has occurred
OperationalStatus Substate of current CIDRW
operations RO Y 20
"IDLE"
"BUSY"
"MANT"
"CP" ("CP": V700-L22-V2 only)
SoftwareRevisionLevel Software revision (version) RO Y 20 6byte
"VVV.RR"
(VVV = version, RR = revision)
CarrierIDOffset The position of the offset,
referenced to the first byte
of the carrier ID in the ID
Tag. RW N V700-L22: 20 00-15
However, (CarrierID Car-
rierIDLength)
≤ 16
V700-L22-V2: 20 00-31
However, (CarrierID Car-
rierIDLength)
≤
T_CIDLEN
CarrierIDlength The number of bytes in the
carrier ID (if there are any
non-visible ASCII charac-
ters in the carrier ID, the
CIDRW returns an error to
the host controller.
RW N V700-L22: 20 00-15
However, (CarrierID Car-
rierIDLength)
≤
16
V700-L22-V2: 20 00-31
However, (CarrierID Car-
rierIDLength)
≤
T_CIDLEN
Non-Visible ASCII
"NVASC" Treatment of non-visible
ASCII in CID area RW N 20
"NOM"
"ALL"
"STD"
"EXT"