![background image](http://html1.mh-extra.com/html/omron/sysmac-cj-series/sysmac-cj-series_operation-manual_743585274.webp)
All BASIC commands
Section 4-2
262
4-2-257 WAIT LOADED
/i
4-2-258 WAIT UNTIL
/i
Type
System command
Syntax
WAIT LOADED
Description
The
WAIT LOADED
command suspends program execution until the
base axis has no moves buffered ahead other than the currently execut-
ing move. The command can only be used in a program.
This is useful for activating events at the beginning of a move, or at the
end when multiple moves are buffered together.
WAIT LOADED
works on the default basis axis (set with
BASE
) unless
AXIS
is used to specify a temporary base axis.
Arguments
N/A
Example
' Switch output 8 ON at start of MOVE(500) and OFF at end
MOVE(800)
MOVE(500)
WAIT LOADED
OP(8,ON)
MOVE(400)
WAIT LOADED
OP(8,OFF)
See also
AXIS
,
WAIT IDLE
Type
System command
Syntax
WAIT UNTIL condition
Description
The
WAIT UNTIL
command repeatedly evaluates the condition until it is
TRUE
. After this program execution will continue. The command can
only be used in a program.
Arguments
•
condition
Any valid BASIC logical expression.
Example
In this example, the program waits until the measured position on axis 0
exceeds 150, and then starts a movement on axis 1.
WAIT UNTIL MPOS AXIS(0)>150
MOVE(100) AXIS(1)
Example
The expressions evaluated can be as complex as you like provided they
follow BASIC syntax, for example:
WAIT UNTIL DPOS AXIS(2) <= 0 OR IN(1) = ON
The above line would wait until the demand position of axis 2 is less
than or equal to 0 or input 1 is on.
See also
N/A
Содержание SYSMAC CJ Series
