Olympus FLUOVIEW FV300, Руководство пользователя

Страница: 550 / 564

Maintenance of Major System Units/
Laser Scanning Microscope
V .
MAINTENANCE
V.
2 - 2
Page
2-2 Laser Scanning Mi croscope
According to IEC60825 “Safety of Laser Products” and EN60825, this product is
classified as a CLASS 3B laser product. However, as it belongs to “CLASS 3B with a
laser wavelength range from 400 to 700 nm, which is no more than 5 times the AEL of
CLASS 2”, all of the microscope modules listed below can be attached or removed as a
part of their maintenance activities. Nevertheless, do not attach or remove any of the
following units before turning all the laser units, or the dangerous laser come out.
For details, refer to the instruction manual of your microscope.
The other hand, in the United States of America, this product is classified as a CLASS
a laser product according to the CDRH laser safety regulation. Attachment or
removal of the microscope modules listed below is not permitted as a part of user
maintenance activities. Such attachment and removal should be performed as a part
of service activities.
For detailed information, refer to our service representatives.
1) Transmitted lamp housing
2) Transmitted light fiber cable
3) Cube turret of reflected light fluorescence unit
4) Objective revolving nosepiece
5) Objectives
6) Condenser
7) Differential interference slider
8) Excitation Cube (Inside the scan unit)
9) Detection mode slider