Olympus FLUOVIEW FV300, Руководство пользователя

Страница: 399 / 564

APPLIED OPERATIONS
/Image Analysis
IV.
OPERATION INSTRUCTIONS
IV .
2 - 2 8 5
Page
2-7-3-3 Measuring the Change in Mean Value of Intensity
The mean value of the intensity in a region specified in an image can be measured and
displayed graphically.
1. Display the [Series] sub-panel at the front.
2. Display the [Display] panel of the image that you want to check the intensity at the
front.
3. When the image is composed of multiple image slices, operations will be applied to
each slice of the image. When the image is composed of a single image slice or
when one of the multiple image slices is selected, the [Single Slice Integration]
group box appears as shown below. Select the direction of interest (X or Y) using
the option buttons.
When the selected image was acquired in the XY observation
mode, the [Single Slice Integration] group box shows the
option buttons for selection of the X- or Y-direction. When the
selected image was acquired in the XT observation mode, the
option buttons for selection of the X- or T-direction are
displayed.
Example) When the direction of interest is selected in the [Single Slice Integration] group
box, line-by-line computation operation starts on the perpendicular lines to the
selected direction. For example, an image acquired in XY observation is
checked as shown below.
Y
n
¤
X
( When the X-direction is selected ) ( When the X-direction is selected )
¤
X
Y
n
NOTE