Olympus FLUOVIEW FV300, Руководство пользователя

Страница: 162 / 564

APPLIED OPERATIONS
/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2 - 4 8
Page
3 Setting the number of sc ans
1. Set the number of scans using the < > or < > button in the [N] text box in the
[Time Series] sub-panel.
4 Acquiring image
Click the <XYT> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
When the built-in power supply for transmitted light illumination is used for a long period
in the XYT mode, the metallic parts may be expanded by heat, causing the focusing to
be deviated. To acquire precise image data, it is recommended to set the power switch
of the transmitted light illumination to “O” (OFF).
While acquiring an image in the XYT observation mode, clicking the <STOP SCAN>
button changes the buttons at the upper part of the [Acquire] panel as shown below. The
<Resume> button restarts image acquisition at the frame next to the frame where the
acquisition is suspended.
<Resume> button
Restarts image acquisition at
the frame next to the frame
where the acquisition is
suspended.
<Series Done> button
Determines the acquired
images. Once this button is
clicked, it is not possible to
append an image.