Olympus FLUOVIEW FV300, Руководство пользователя

Страница: 145 / 564

APPLIED OPERATIONS
/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2 - 3 1
Page
2 Setting the observation mode
1. From the page tabs on the bottom right of the [Acquire] panel, select the [Settings]
sub-panel.
2. Click the [Depth] option button in the [Mode] group box.
3. In the [Acquire] panel, select the XZ observation mode option button.
3 Setting the observation line
1. A line is displayed on the image in the [Live] panel. Place the mouse pointer arrow
on the line and drag it to the position you want to observe.
4 Setting the numbers of s teps and acquired image slices
1. From the page tabs on the bottom right of the [Acquire] panel, select the [Z Stage]
sub-panel.
2. The number of steps has already been set and displayed in the [Step Size] text box.
This number can be changed using the < > or < > button in the [Step Size] text
box.
The number of steps in the [Step Size] text box has been calculated by the
system so that the depth scale of the acquired image is identical to the
horizontal scale.
The number of steps calculated by the system may be erroneous
unless the XZ observation mode has been set previously.
The number of acquired images shown in the [Slices] text box can also be
input from the keyboard.
After setting [Start Z] (Z-direction scan start position) and [Stop Z] (Z-
direction scanning stop position), input the desired number of images in the
[Slices] text box. This automatically sets [Step Size] (number of steps).
TIP
NOTE
TIP
[Step Size] text box
[Slices] text box