Olympus FLUOVIEW FV300, Руководство пользователя

Страница: 266 / 564

APPLIED OPERATIONS
/ Protocol processor
IV.
OPERATION INSTRUCTIONS
IV .
2 - 1 5 2
Page
1 Description of Setting Items
The [PAPP] window has the setting items as described in the following.
·Setting items, particularly each laser of [Laser Intensity], [PMT Voltage], [Gain] and
[Offset] may be different, depending upon the system; and usable laser and channel on
the system are displayed in each column of laser and channel.
·Value in each column is set in FLUOVIEW software right after protocol execution.
·When [Init] is selected in each column, the default value set in [Init Val] box is used.
·Blank cell refers to the setting of one previous track.
·Width of each row can be adjusted by mouse drag action on border line of row. By
double click action over the border, the width can automatically be adjusted according to
the length of characters.
<Get Init Values> button
Click to acquire the current
settings in the [Acquire]
panel as the initial values of
the settings.
[Init Val] box
Shows the initial values of
the settings.
[Image File Name] text box
Enter the file name in which the image
acquired will be saved.
<Path> button
Specify the folder for
saving the image
acquired.
[Remaining Time]
Shows the time till the end of protocol by means of figures and indicators.
When [Alarm in Interval remaining time] in the [Option] menu is checked,
beep tones can be generated at 30 seconds before the end of protocol
(single beep), 20 seconds before it (two beeps), between 10 seconds and
5 seconds before it (a beep every second) and between 5 seconds before
it and the actual end of protocol (successively).
When each item on each
column is mouse-right
clicked, pop up menu as
shown below appears. It
is possible to select
Display/Not to display of
each column.