NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 190 / 225

3
Checking the Procedure
In data communication, the connection is
made through a dial-up connection with
Internet service providers or LANs that
support FOMA packet communication.
■ About the "FOMA N600i CD-ROM" provided
z
The CD-ROM contains the "N600i communi
-
cation setting file (drivers)" and the "FOMA
PC setting software".
z
The N600i communication setting file is
software (driver) needed for connecting the
FOMA terminal with PC via the FOMA USB
Cable (optional) to carry out packet communi -
cation. Installing the N600i communication
setting file embeds each driver into Windows.
Using the FOMA PC setting software allows
you to easily set up packet communication
and create a dial-up connection.
Flow Chart for completing the
data communication setup
This section describes preparation to
use packet communication.
※： To use Internet connecting the FOMA terminal and a PC,
"mopera U" (you need to subscribe) is useful, which supports
broadband connection, international roaming, etc. Consider
the plan in which you are charged only in a month when you
use the service. If you use "mopera" for which you do not
need to subscribe, you can access the Internet immediately.
Connecting the devices
The following procedure explains how to
connect the FOMA USB Cable (optional):
1
Open the external connector
cap of the FOMA terminal
2
Connect the USB connector of
the FOMA USB Cable to the USB
terminal of your PC
3
Check the orientation of the
external connector of the FOMA
terminal, and then insert the
external connector of the FOMA
USB Cable straight until you hear
a click
" " appears on the FOMA terminal display
when the FOMA USB Cable is connected.
Install the FOMA PC
setting
･ Enables you to use FOMA PC
setting software. Installing the
FOMA PC Setting Software"→p.8
Connect to PC/Install N600i
Communication setting file (Driver)
･ Connect the PC with the FOMA terminal using the
FOMA USB Cable (optional).→p.3
･ Install the N600i communication setting file (driv -
ers).→p.4
Set up
･ mopera U, mopera
※
→p.10
･ Other providers→p.11
Set up
･ Set up communication not
using the FOMA PC setting
software→p.18
Connect and disconnect
･ Connect→p.28
･ Disconnect→p.29
Connect and disconnect
･ Connect→p.13
･ Disconnect→p.13
＜To set up the connecting
destination ＜Not using FOMA PC
setting software>
NOTE
z
Do not plug the FOMA USB Cable connector
forcibly. You cannot connect the cable without
the correct direction and angle. If you plug the
cable properly, it will be smoothly inserted
without stress. If it is not done smoothly, stop
plugging in forcibly, and make sure of the
connector shape and direction once again.
z
" "
appears on the FOMA terminal display
when the N600i communication setting file for
data communication is installed and the con
-
nection with PC is recognized. Before the
N600i communication setting file is installed,
the connection is not recognized and "
"
does not appear.
Connecting the terminal
(Plug in the connector with
DoCoMo logo facing upward)
USB connector
PC
USB terminal
FOMA USB
Cable
(optional)
FOMA terminal
External
connector