NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 217 / 225

30
AT Command List
AT commands available on FOMA terminal
● The following abbreviations are used in the AT command list:
[&F]:The settings are initialized by AT&F command.
Modem port command list
The following commands can be used for "FOMA N600i"（モデム） (modem):
AT command Outline Parameter/description Execution examples
AT − Adding a command in this table after
this command controls the modem
function of the FOMA terminal.
※OK is returned even when only AT is
entered. AT
OK
AT&C n
[&F]
Selects the operating
condition of the circuit
CD signal to DTE. n =0: CD is always ON
n =1: CD changes by the carrier of the
other party's modem (initial
value)
AT&C1
OK
AT&D n
[&F]
Selects the operation
to be performed when
the circuit ER signal
received from DTE
transits between ON
and OFF. n =0: Ignores ER status (always
assumed to be ON)
n
=1: When ER changes from ON to
OFF, it will be in an on-line
command status
n
=2: When ER changes from ON to
OFF, the line is disconnected and
it will be in an off-line command
status (initial value)
AT&D1
OK
AT&F
n
Restores all registers
to the factory set
-
tings.
If this command is
entered during com
-
munication, the line
will be disconnected.
Only
n
=0 can be specified (can be
omitted)
(In off-line mode)
AT&F
OK
AT&F?
ERROR
AT&F=?
ERROR
(In on-line command mode)
AT&F
NO CARRIER
(Changes to off-line mode)
AT+CBST
[&F]
Sets the bearer serv
-
ice settings when the
line is connected.
Format：
AT+CBST=<speed>,<name>,<ce>
<speed>116： 64000 bps
(initial value)
131：32000 bps
134：64000 bps
<name> 1 ：data circuit synchro-
nous (UDI or 3.1 kHz
modem) (initial value)
<ce> 0 ：transparent
(initial value)
This command is valid only when
+FCLASS=0
AT+CBST=116,1,0
OK
AT+CBST?
+CBST:116,1,0
AT+CBC Displays the battery
status. CBC<bcs>,<bcl>
<bcs>
0： FOMA terminal is powered by the
battery
1： FOMA terminal is not powered by
the battery
2： FOMA terminal is not connected to
the battery
3： FOMA terminal is out of transmis
-
sion due to the power-supply error
<bcl>
0 to 100： Battery remained
AT+CBC
+CBC:0,80
OK
AT+CBC?
ERROR
AT+CBC=?
+CBC:(0-3), (0-100)
OK
AT+CGDCONT Sets the access
point name (APN) for
packet origination.
p.36 p.36