NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 224 / 225

37
・Operation performed when the parameter
is omitted
+CGEQREQ=：Sets initial values to all <cid>.
+CGEQREQ=<cid>：Sets the specified <cid>
to the initial value.
・Execution example
Only the following one pattern can be set,
which is set as an initial value to each cid.
Requesting the connection at uplink 64kbps
and downlink 384kbps (cid is 2)
AT+CGEQREQ=2
OK
Saving modem port command setting value
The values set by AT commands are initialized
when the FOMA terminal is turned on or off,
excluding the access point name (APN) set by
AT+CGDCONT command (p.20) and QoS (qual
-
ity of service) setting by AT+CGEQMIN/
AT+CGEQREQ commands. These values can
be retrieved by entering
ATZ
even after the power is turned on or off.
Result code
■ Result codes on data communication
■ Extended result codes
･ &E0
･ &E1
■ Communication protocol result codes
Number Character Description
0 OK Successfully executed.
1 CONNECT Connected.
2 RING Receiving a call.
3 NO
CARRIER Line disconnected.
4 ERROR Cannot accept command.
6 NO
DIALTONE Cannot detect dial tone.
7 BUSY Detecting busy tone.
8 NO
ANSWER Time up for connection.
100 RESTRIC
-
TION
Network restricted.
101 DELAYED Redialing restricted.
Number Character Description
121 CONNECT
32000 Connected between the
FOMA terminal and base
station at 32,000 bps.
122 CONNECT
64000 Connected between the
FOMA terminal and base
station at 64,000 bps.
125 CONNECT
384000 Connected between the
FOMA terminal and base
station at 384,000 bps.
Number Character Description
5 CONNECT
1200 Connected between the
FOMA terminal and PC at
1,200 bps.
10 CONNECT
2400 Connected between the
FOMA terminal and PC at
2,400 bps.
11 CONNECT
4800 Connected between the
FOMA terminal and PC at
4,800 bps.
13 CONNECT
7200 Connected between the
FOMA terminal and PC at
7,200 bps.
12 CONNECT
9600 Connected between the
FOMA terminal and PC at
9,600 bps.
15 CONNECT
14400 Connected between the
FOMA termin al and PC at
14,400 bps.
16 CONNECT
19200 Connected between the
FOMA terminal and PC at
19,200 bps.
17 CONNECT
38400 Connected between the
FOMA terminal and PC at
38,400 bps.
18 CONNECT
57600 Connected between the
FOMA terminal and PC at
57,600 bps.
19 CONNECT
115200 Connected between the
FOMA terminal and PC at
115,200 bps.
20 CONNECT
230400 Connected between the
FOMA terminal and PC at
230,400 bps.
21 CONNECT
460800 Connected between the
FOMA terminal and PC at
460,800 bps.
Number Character Description
5 PACKET Connected via packet
communication
NOTE
z
The result code is displayed in character
format (initial value) when ATVn command
(p.35) is set to n=1, and in number format
when the command is set to n=0.
z
The communication speed is displayed to keep
the compatibility for PC process with the modem
connected by traditional RS-232C. The displayed
speed differs from the actual connection speed
because the FOMA terminal and PC are
connected via FOMA USB Cable (optional).
z
"RESTRICTION" (Number: 100) indicates that
the communication network is congested. If
this is displayed, wait a while and then try
again.