NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 199 / 225

12
6
Click "接続先（APN）設定" (Specify
the access point (APN))
At the time of purchase, the mopera
access point name (APN) "mopera.ne.jp" is
specified for cid1, and the mopera U
access point name (APN) "mopera.net" is
specified for cid3. Specify the access point
name (APN) for cid2 or 4 to 16.
Open the " 接続先（APN）の 追加" (Add the
access point (APN)) screen by clicking the
"追加" (Add) button, specify an access point
name that supports FOMA packet commu
-
nication and then click "OK". Return to the
"接続先（APN）設定" (Specify the access point
(APN)) screen.
Only half-pitch alphanumeric characters,
hyphen (-) and dots (.) can be entered for
the access point.
7 Select the access point (APN)
and click "OK"
Returns to the screen in Step 5.
The access point (APN) entered in Step 6
appears on "接続先（APN）の選択" (Select the
access point (APN)).
8
Confirm the Access point (APN)
on " 接続先（APN）の選択 " (Select
the access point (APN)) and
click "次へ " (Next)
＜To specify advanced settings (TCP/IP
settings)＞
Clicking " 詳 細情報の設定 " (Set up details)
displays the setup screen for "IP address"/
"Name Server". If they must be entered as
the provider or corporate LAN dial-up
information, follow the entry directions to
enter the addresses.
9
Specify a user name and
password and click "次へ" (Next)
Select the user for Windows 2000/Win
-
dows XP. Selecting すべてのユーザー " (All
Users) sets the connection for all users on
Windows.
When setting the user name and
password, enter the correct, case-
sensitive data provided by the service
provider.
10
Check "最適化を行う" (Optimize the
setting) and click "次へ " (Next)
Optimizes "W-TCP 設定" (W-TCP settings)
required for "Packet communication". If they
are already optimized, this screen will not
appear. Proceed to Step 11.
11
Check the settings and click "完
了 " (Finish)
The contents will be listed. Make sure that
all the settings are correct.
Checking "デスクトップにダイヤルアップのショー
トカットを作成する" (Add dial-up shortcut on
desktop) automatically creates the shortcut
icon.
To change the settings, click "戻る" (Back).
12
Click "OK"
You need to restart Windows to enable the
changes made to the settings. If the
restart screen appears, click "はい" (YES).
The communication is carried out.→ p.13
（Windows 2000, Windows XP）