NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 216 / 225

29
4
Confirm the settings and click
"ダイヤル " (Dial)
The following screen shows an example for
mopera connection. You can connect
either to mopera U or mopera with user
name and password columns blank.
＜The Connecting screen appears＞
The user name and password are
confirmed to be ready to log on.
＜ Connection completed ＞
When the connection is completed, the
following message appears from the
indicator of the taskbar located at the
right-bottom of the desktop for a few
seconds.
You can use e-mail or run the browser
software to browse Websites.
If this screen does not appear, check
the settings of the access point again.
See p.28 for communication status.
When this happens
z
Check the following if you cannot connect
to the network or dial-up successfully:
How to disconnect
Just closing the Internet browser may
not disconnect the communication line.
Follow the instructions below to discon
-
nect for sure. This section takes Win
-
dows XP for example.
1
Double-click the dial-up icon in
the Task tray
The status screen for the Internet
connection will appear.
2
Click " 切断 " (Disconnect)
Problem Points to check
"FOMA
N600i" is
not
recognized
by the PC ・ Check if your PC is equipped with
the environment required (p.2).
・ Check if the N600i communication
setting file has been correctly
installed.
・ Check if the FOMA terminal is
connected to the PC and the
power is turned on.
・ Check if the FOMA USB Cable
(optional) is firmly connected.
Unable to
connect
to the
access
point ・ Check if the settings for the ID
(user name) and password are cor
-
rect
・ Check if the FOMA USB Cable
(optional) is firmly connected.
・ If the access point requires the
Caller ID, make sure that "184" is
not prefixed to the phone number.
・ Check if the " フロー制御を使う" (Use
the flow control) box of the modem
properties is selected.
・ Check if the APN is set correctly.
・ If you still cannot connect to the
other end after checking the
above, check with the Internet
service provider or network admin
-
istrator about the setting method.
NOTE
z
The communication speed displayed on the PC
may be different from the actual communication
speed.
Dial-up icon