NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 223 / 225

36
● Supplementary explanation
of AT command
■ Non-operating commands
The following commands do not generate
errors but will not function as a command:
・ ATT (Tone setting)
・ ATP (Pulse setting)
■ Command name: +CGDCONT
・Outline
Sets the access point name (APN) for packet
origination.
This is a set command, but is not reset by
[&F] or [Z].
・Format
+CGDCONT=[<cid>[,"PPP"[ , "<APN>"] ] ]
・Parameter
Sets the access point name (APN) for packet
origination. See the following command exe
-
cution example:
<cid>
※
： 1 to 16
<APN>
※
： Any value
※： <cid> is a number for managing the
access point name (APN) to register on
the FOMA terminal for a packet communi
-
cation. A number from 1 to 16 is availa
-
ble on the FOMA terminal.
"mopera.ne.jp" is registered to <cid>=1
and "mopera.net" to <cid>=3 as an initial
value. Specify cid 2 or 4 to 16 as the
APN.
<APN> is a string indicating each
access point name.
・Operation performed when the parameter
is omitted
+CGDCONT=：Sets initial values to all <cid>.
+CGDCONT=<cid>：Sets the specified <cid>
to the initial value.
+CGDCONT=?：Displays a list of values that
can be set.
+CGDCONT?：Displays the current setting.
・Execution example
When registering an APN named abc (cid is
2)
AT+CGDCONT=2, "PPP", "abc"
OK
■ Command name:
+CGEQMIN=[Parameter]
・Outline
Registers a criterion to be used to decide
whether or not to accept the QoS (quality of
service) sent from the network when PPP
packet communication is established.
Can set one of the four setting patterns
described in the following execution example.
This is a set command, but is not reset by
[&F] or [Z].
・Format
+CGEQMIN=[<cid>[,,<Maximum bitrate UL>
[,<Maximum bitrate DL>] ] ]
・Parameter
<cid>
※
： 1 to 16
<Maximum bitrate UL>
※
： None (initial value)
<Maximum bitrate DL>
※
： None (initial value)
※： <cid> is a number for managing the
access point name (APN) to register on
the FOMA terminal for a packet communi
-
cation. A number from 1 to 16 is
available on the FOMA terminal.
"mopera.ne.jp" and "mopera.net" are regis
-
tered as default to cid1 and cid3,
respectively. If you would like to set
other APNs, specify cid2 or cid4 to cid16
for them.
<Maximum bitrate UL> and <Maximum
bitrate DL> set the minimum communi
-
cation speeds (kbps) of uplink and
downlink between the FOMA terminal and
base station. When it is set to "None"
(initial value), all speeds are available.
When set to 64 or 384, a connection
cannot be established at other than 64
or 384, which means that a packet
communication may not be established.
・Operation performed when the parameter
is omitted
+CGEQMIN= ：Sets initial values to all <cid>.
+CGEQMIN=<cid>：Sets the specified <cid>
to the initial value.
・Execution example
Only the following four patterns can be set.
(1) is set as an initial value to each cid.
(1) Allowing all speeds for uplink and
downlink (cid is 2)
AT+CGEQMIN=2
OK
(2) Allowing the speeds of uplink 64kbps
and downlink 384kbps (cid is 4)
AT+CGEQMIN=4,,64,384
OK
(3) Allowing uplink 64kbps and all downlink
speeds (cid is 5)
AT+CGEQMIN=5,,64
OK
(4) Allowing all uplink speeds and downlink
384kbps (cid is 6)
AT+CGEQMIN=6,,,384
OK
■ Command name:
+CGEQREQ=[Parameter]
・Outline
Sets the QoS (quality of service) to request
network to send when originating PPP packet
communication.
Can set only one setting pattern described in
the following execution example, which is
also set as an initial value.
This is a set command, but is not reset by
[&F] or [Z].
・Format
+CGEQREQ=[<cid>]
・Parameter
<cid>
※
：1 to 16
※ <cid> is a number for managing the
access point name (APN) to register on
the FOMA terminal for a packet communi
-
cation. A number from 1 to16 is available
on the FOMA terminal.
"mopera.ne.jp" and "mopera.net" are regis
-
tered as default to cid1 and cid3,
respectively. If you would like to set other
APNs, specify cid2 or cids4 to 16 for
them.