NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 208 / 225

21
5
Enter any name in the " 名 前 "
(Name) column and click "OK"
"sample" is entered here as an example.
6 Select "FOMA N600i" from " 接続
方法 " (Connection method), and
click "OK"
If a COM port of "FOMA N600i" can be
selected
When the COM port property is dis -
played, click "OK".
"COM3" is selected here as an example.
See "Checking the COM port" (p.18) to
confirm the actual COM port number of
"FOMA N600i" to be selected in " 接続方法"
(Connection method).
If a COM port of "FOMA N600i" cannot
be selected
Click "キャンセル" (Cancel) to close the
"接続の設定" (Connection Settings) screen
and then follow the steps below:
(1) Select "ファイル" (File) →"プロパ
ティ " (Properties)
(2) Select "FOMA N600i" in the "接続
方法" (Connection method) column
on the " 接続の設定" (Connection
Settings) tab of the "sampleのプロ
パティ " (sample Properties)
(3) Uncheck "国/地域番号と市外局番を
使う" (Use the Country/Region
Code and Area Code)
(4) Click "OK"
7
Enter the access point (APN)
and press
Enter in the format of
AT+CGDCONT=＜ cid＞, "PPP", "APN"
＜cid＞:Enter any number from 2, 4
to 16
If cid has been already set, the setting will
be overwritten.
"PPP" :Enter "PPP".
"APN":Enclose the access point
(APN) in " " (double quota
-
tion mark).
"OK" means that setting the access point
(APN) is completed.
Example:To enter APN named XXX.
abc in cid No. 2
Enter
AT+CGDCONT=2, "PPP", "XXX.abc"
8
Confirm that "OK" is displayed,
and select "ハイパーターミナルの終
了 "(Exit Hyper Terminal) from
the " ファイル " (File) menu
You will be asked""sample" と名前付けされた接
続を保存しますか？ " (Do you want to save the
connection named "sample" ?). You usually do
not need to save it.
NOTE
z
The AT commands entered in "Hyper terminal"
may not be displayed after Step 6 on p.21. In
this case, entering ATE1
displays the AT
commands entered thereafter.
To reset the access point (APN) settings using
the AT command
・ If you reset, the access point (APN) setting on
cid=1 will be restored to "mopera.ne.jp" (default
setting)
and cid=3 (APN) setting to
"mopera.net" (default setting), and cid=2, 4
through 16 will be unregistered.
＜How to enter＞
AT+CGDCONT= （to reset all cid)
AT+CGDCONT= ＜cid ＞ (to reset a
certain cid only)
To confirm the access point (APN) settings
using the AT command
・ Displays the current settings.
＜How to enter＞
AT+CGDCONT?