NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 66 / 225

58
● Releasing PIN lock
If you enter your PIN1 or PIN2 code incorrectly 3 times in total, a
message appears notifying you that the respective PIN1 or PIN2 code
has been locked, and when PIN lock is set, the PUK code entry screen
then appears. If this occurs, you must enter the 8-digit PUK code and
unlock the locked PIN1 or PIN2 code and then set a new PIN1 or PIN2
code.
● For your PUK code, refer to the FOMA terminal contract
(customer copy) that you received when you subscribed to the
FOMA terminal. If you enter your PUK code incorrectly 10 times
in total, your FOMA card (UIM) is then completely locked. Keep
your FOMA contract (customer copy) in a safe place to ensure
that you do not lose it.
● If you forget your PUK code and your FOMA terminal is completely
locked, you need to take your FOMA terminal, current FOMA card
(UIM) and a form of identification proving that you are the registered
service subscriber (such as a driver's license) to an NTT DoCoMo
shop or service counter to have it unlocked.
<All lock>
Preventing Others from Using
Your Terminal
Lock your FOMA terminal to prevent others from using it.
● While All lock is set, none of the functions can be used except
for:
・ Turning the FOMA terminal on/off
・ Calling emergency numbers (110, 119 or 118)
1
On the standby screen [Left] J (Settings)
J "Lock/Security"
2
"All lock" J Enter your security code
The FOMA terminal is locked, and "All lock is set" message
appears on the screen.
■ To release All lock
Enter your security code
･ If you fail to release All lock 5 times in a row, the FOMA
terminal is turned off. Turn on the FOMA terminal again
and enter the correct security code.
<Mail security>
Preventing Unwanted Mail
Display
This function enables you to apply security measures to your Inbox,
Outbox, or Draft so that their contents cannot be viewed by other
people without your approval. Mailboxes with security set cannot
be opened unless the security code is entered.
1
On the standby screen [Right]
J "Mail settings"
2
"Display settings" J "Mail security"
3
J Enter your security code J "OK"
4
Select the mailbox to set security J "OK"
<Call rejection>
Enabling Call Rejection
Enable the "Call rejection" settings stored in each phonebook. This
function enables you to reject the calls from the phone numbers
specified on Call rejection.
● For details on the "Call rejection" settings in the phonebook, refer
to "Adding Information to the phonebook"（p.42).
1
On the standby screen J "Call rejection"
2
Enter your security code
3
"ON"
■ To inactivate the call rejection setting
Select "OFF"