NTT docomo SIMPURE N Foma N600i, Руководство пользователя

Страница: 197 / 225

10
How to Set Various Settings
The FOMA terminal needs to be con
-
nected to your PC via FOMA USB Cable
(optional), and the Communication set
-
ting file needs to be properly recognized
on the device of your PC.
z
If the FOMA terminal is recognized as the
number higher than COM20, the "FOMA
PC設定ソフト" (FOMA PC setting software)
will not run.
1 Select "スタート" (Start) →"プログラ
ム" (Program) →"FOMA PC 設定ソフ
ト " (FOMA PC setting software)
For Windows XP
Select "スタート" (Start) →"すべてのプログ
ラム" (All programs) →"FOMA PC 設定ソフ
ト " (FOMA PC setting software)
Launching the FOMA PC setting software
displays the following screen:
Easy settings: "Packet communication
setting by using mopera U or mopera"
z
This section explains how to make settings
for a packet communication of 384kbps
maximum. The DoCoMo Internet service
"mopera U" or "mopera" will be used as a
provider.
Packet communication: Enables high-speed
packet communication of up to 384kbps for
receiving and up to 64kbps for sending (there
are exceptions for some machine types).
Since you will be charged for the amount of
data transferred, you can enjoy data
communication without worrying about time.
z
DoCoMo Internet service "mopera U" or
"mopera" is available. "mopera U" is a pay
service for which you need to apply.
"mopera" is a free service for which you do
not need to apply.
z
Note that the communication charge can
become high if "packet communication" is
used to exchange large volumes of data
e.g. to view website containing images or to
download files.
1
Click "かんたん設定 " (Easy settings)
2
Select " パケ ッ ト 通 信 " (Packet
communication) and click " 次 へ"
(Next)
3 Select "[mopera U] へ の 接 続 "
(mopera U access) or "[mopera]
へ の 接 続 " (mopera access) and
click "次へ " (Next)
See p.11 if you use a provider other than
mopera U or mopera.
4 Click "OK"
The access point (APN) settings will be
obtained from the FOMA terminal that is
connected to the PC. Wait a while.
5
Enter the connection name and
click "次へ " (Next)
You can specify the name of the access
point.
Enter a name easy to recognize in the "接続
名" (Connection Name) column.
Enter the connection name correctly
paying attention to upper/lower cases.
You cannot use the following reserved
characters:
¥
/:＊ ?!<>│" (half-pitch only).