Nidec Control Techniques Digitax-SF DA21223, Инструкция по эксплуатации

Страница: 363 / 386

10
9. Appendices
Digitax SF
Instruction Manual
1. Absolute System
Initializing Encoder with
Digitax SF Connect
(continued)
END
1. Under the Alarms tab, check the following
alarms that are occurring.
ȁŏŰįġIJĹȁņůŤŰťŦųġŦųųŰųġĩŤŪųŤŶŪŵĪ
ȁŏŰįġijıȁņůŤŰťŦųġŦųųŰųġĩŮŶŭŵŪĮŵŶųůġťŢŵŢĪ
ȁŏŰįġijIJȁņůŤŰťŦųġŦųųŰųġĩŷŰŭŵŢŨŦġťųŰűĪ
ŕũŦġŔŦŵŶűġőŢůŦŭġŰůġŵũŦġŢŮűŭŪŧŪŦųġťŪŴűŭŢźŴġġġġġġġġġġġġġġġġġġį
2. Under the Auxiliary functions tab, select Encoder.
3. Click on Get Encoder Status.
7. Cycle the control power.
6. Click Yes.
4. Check one of the boxes.
5. Click Clear encoder.
Until checking the boxes, the encoder clear button
does not work.
1. Under the Auxiliary functions tab, select Encoder.
2. Click on Show Encoder Status.
3. Verify that this value is 0.
Step 3B
Confirm
Turn on the control power and start communicating with the
drive by using Digitax SF Connect.
If an alarm occurs
① Check the following.
・Is the battery connected correctly?
・Is the battery voltage normal?
・Is the encoder cable connected correctly?
・Are the wiring and connections all correct?
② Repeat Step 3.