Nidec Control Techniques Digitax-SF DA21223, Инструкция по эксплуатации

Страница: 18 / 386

5. The object of the declaration is in conformity with the relevant European Union harmonisation legislation.
Restriction of Hazardous Substances Directive (2011/65/EU)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU).
6. References to the relevant harmonised standards used
The servo motor and drive products listed above have been designed and manufactured in accordance with the following European harmonised
standards:
EN 61800-5-1:2007+ A1:2017
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal
and energy
EN 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance
EN 60034-5:2001
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of
rotating electrical machines (IP code) - Classification
EN 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection
EN 55011:2009+A1:2010
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics – Limits
and methods of measurement
EN 61000-6-2: 2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
7. Signed for and on behalf of:
Jon Holman-White
Vice President of Research and Development
Nidec Control Techniques Ltd
Date: 22
nd March 2019
Newtown, Powys, UK.
12
Digitax SF
Instr
u
ction
Manual
EU Declaration of Conformity
7. Signed for and on behalf of:
Servo Motors
MY500, MY101, MX201, MZ201, MX401, MZ401, MX751, MZ751, MM102, MH102, MM152, MH152, MM202
Motor Drives
DA2YZ23, DA2Z123, DA21223, DA22423, DA23823, DA24A23, DA26B23, DA28C23
The model numbers may be followed by other characters that do not affect the ratings.
3. The object of the declaration is in conformity with the relevant European Union harmonisation legislation.
Restriction of Hazardous Substances Directive (2011/65/EU)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU).
4. References to the relevant harmonised standards used
The servo motor and drive products listed above have been designed and manufactured in accordance with the following
European harmonised standards:
EN 61800-5-1:2007+ A1:2017
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
EN 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance
EN 60034-5:2001
Rotating electrical machines - Part 5: Degrees of protection provided by the integral
design of rotating electrical machines (IP code) - Classification
EN 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection
EN 55011:2009+A1:2010
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics – Limits and methods of measurement
EN 61000-6-2: 2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
Jon Holman-White
Vice President of Research and Development
Nidec Control Techniques Ltd
Date: 13
th
June 2019
Newtown, Powys, UK.
These electronic drive products and motors are intended to be used with controllers, electrical protection components
and other equipment to form complete end products or systems. Compliance with safety and EMC regulations
depends upon installing and configuring the drives and motors correctly, including using the specified input filters.
The drives must be installed only by professional installers who are familiar with requirements for safety and EMC.
Refer to the Product Documentation. An EMC data sheet is available giving detailed information. The assembler is
responsible for ensuring that the product or system complies with all the relevant laws in the country where it is to be
used.
This declaration is issued under the sole responsibility of the manufacturer
1. Name and address of the manufacturer
Nidec Control Techniques Ltd
The Gro
Newtown
Powys
SY16 3BE
UK
Registered in England and Wales. Company Reg. No. 01236886
Telephone: 00 44 1686 612300
E mail: marketing.control techniques@mail.nidec.com
Web: www.controltechniques.com
2. Object of the declaration
Digitax SF variable speed AC servo motors and motor drives