Nidec Control Techniques Digitax-SF DA21223, Инструкция по эксплуатации

Страница: 379 / 386

26
9. Appendices
Digitax SF
Instruction Manual
4. Status Display
Status
Load Factor
Units Bytes Signed
Status No.
（Hexadecimal number）
131 （83）
digit 2 no
Description
Indicates the motor load factor.
The value of 1,000 is equivalent to 100% of the rated load.
This item becoming 1,440 (120%) is an indicator of overload. Adjust the operating conditions
such that this value remains under 1,000.
Calculation formula： Motor load factor［%］= √ (Load factor［digit］×10 )
Transmit data
24 01 00 10 00 71 BA 3D
Status
Load Factor (%)
Units Bytes Signed
Status No.
（Hexadecimal number）
132 （-）
% - no
Description The motor load factor is presented in %. (
Digitax SF Connect
only)
Transmit data
-
Status
Encoder/rotor mechanical angle
(single-turn value)
Units Bytes Signed
Status No.
（Hexadecimal number）
194 （C2）
encoder pulse 4 no
Description
Indicates single-turn data of the motor. It is presented in 0 – 131,072 (17bit).
This value is an absolute value.
Transmit data
24 01 00 11 00 C2 1A B5
Status
Encoder/rotor mechanical angle
(integrated value)
Units Bytes Signed
Status No.
（Hexadecimal number）
195 （C3）
encoder pulse 4 yes
Description
This indicates multi-turn data of the motor.
It is presented as a total of encoder feedback pulses.
（ Single-turn value ）+（ 2
17
× Encoder Multi-turn data ）
This item is the absolute data if you are using an absolute encoder.
Transmit data
24 01 00 11 00 C3 0A 94
Status
Encoder temperature
Units Bytes Signed
Status No.
（Hexadecimal number）
205 （CD）
℃ 2 yes
Description Indicates the encoder internal temperature. (for reference only)
Transmit data
24 01 00 10 00 CD DC 6A