NF ZA57630, Инструкция по эксплуатации

Страница: 163 / 246

4.2 Simple Operation for First Time Use
4
-
5
ZA57630
4.2 Simple Operation for First Time Use
This section describes setting procedures for basic measurements.
4.2.1 Common Operations
■ Reset settings.
Reset the settings of this instrument as follows.
Select
[Other]
－
[RESET]
and then tap the
[RESET]
function key. A confirmation message
appears on the LCD. Tap the
[OK]
button to reset the settings.
For details on the settings that are reset, refer to
“3.6 Initial Settings”.
■ SETUP Key
Press the
SETUP
key on the front panel or tap the
[SETUP]
button to display the Setup menu.
This shortcut menu allows you to easily set the items for which settings are frequently changed.
[DISPLAY MODE Y]
: Set the graph Y-axis (measurement item).
[SWEEP ITEM]
: Set the sweep item.
[SWEEP UPPER]
: Set the sweep upper limit.
[SWEEP LOWER]
: Set the sweep lower limit.
[SETTING VIEW]
: Display the major settings.
For details on changing the settings and other procedures, refer to
“3.3.1 Menu Operating
Procedures”.