NF ZA57630, Инструкция по эксплуатации

Страница: 76 / 246

3.4 Operation Tree
3
-
40
ZA 57630
[Calculate]
: Various calculation functions
[EQUIV CKT FITTING]
*1 : Estimate the equivalent circuit.
[CKT TYPE]
*1
: Select the equivalent circuit.
[(prmtr1)]
*1 : Element value 1
[(prmtr2)]
*1
: Element value 2
[(prmtr3)]
*1 : Element value 3
[(prmtr4)]
*1
: Element value 4
[FIT]
*1 : Execute curve fit.
[PZT]
*1
: Piezoelectric element characteristics
[PZT PRMTR]
*1 : Calculate the piezoelectric equivalent circuit.
[C
0
]
*1
: Set the C0 element value.
[L]
*1 : Set the L element value.
[C]
*1
: Set the C element value.
[R]
*1 : Set the R element value.
[FIT]
*1
: Execute piezoelectric equivalent circuit
estimation.
[C
0
MODE]
*1
: Select the method to determine the C0 value.
[FREQ RESOLN]
*1 : Set the frequency resolution.
[PZT CONST]
*1
: Calculate the piezoelectric constant.
[REL PERMT]
*1 : Set the relative permittivity.
[ELECTRODE AREA]
*1
: Set the electrode surface area.
[ELECTRODE DISTANCE]
*1 : Set the distance between electrodes.
[REL PERMB]
*1
: Set the relative permeability.
[CORE AREA]
*1 : Set the core cross-sectional area.
[MAG PATH LENGTH]
*1
: Set the core magnetic path length.
[COIL TURNS]
*1 : Set the number of coil turns.
[WIRE DIAMETER]
*1
: Set the winding diameter.
[ONE TURN LENGTH]
*1 : Set one coil turn length.
[WIRE RESISTIVITY]
*1
: Set the winding resistivity.
*1: Displayed only in the IMPD−EXT, IMPD−3T, and IMPD−2T measurement modes.