NF ZA57630, Инструкция по эксплуатации

Страница: 77 / 246

3.4 Operation Tree
3
-
41
ZA 57630
[Comparator]
*1
: Set the comparator.
[BIN]
*1 : Set BIN sorting / LIMIT comparison.
[FUNCTION]
*1
: Enable or disable.
[DEVIATION TYPE]
*1 : Set the deviation mode.
[PRI REF]
*1
: Set the primary parameter reference value.
[SEC REF]
*1 : Set the secondary parameter reference value.
[BIN SET]
*1
: Set the BIN sorting value.
[ZONE]
*1 : Set ZONE comparison.
[FUNCTION]
*1
: Enable or disable.
[DEVIATION TYPE]
*1 : Set the deviation mode.
[DEVIATION SET]
*1
: Set the reference trace and deviation.
[REF TRACE]
*1 : Set the reference trace.
[Y1 HI]
*1
: Set the Y1 upper limit.
[Y1 LO]
*1 : Set the Y1 lower limit.
[Y2 HI]
*1
: Set the Y2 upper limit.
[Y2 LO]
*1 : Set the Y2 lower limit.
[IMMED SET]
*1
: Set the deviation.
[ACTION]
*1 : Comparison action
[BEEP]
*1
: Turn the beep on/off.
[Other]
: Other settings
[BEEP]
: Turn the beep on/off.
[DATE/TIME]
: Set the date and time.
[RESET]
: Reset the settings.
[AUX PORT STATUS]
: Display the extension port state.
[SYSTEM]
: Display this instrument information.
[TOUCH PANEL ADJ]
: Calibrate the touch panel.
[BRIGHTNESS]
: Adjust the LCD brightness.
[SETUP]
: Open a list of frequently set parameters.
[DISPLAY MODE Y]
: Set the measurement item.
[SWEEP ITEM]
: Set the sweep item.
[SWEEP UPPER]
: Set the sweep upper limit.
[SWEEP LOWER]
: Set the sweep lower limit.
[SETTING VIEW]
: Display a list of setting items.
*1: Displayed only in the IMPD−EXT, IMPD−3T, and IMPD−2T measurement modes.