NF ZA57630, Инструкция по эксплуатации

Страница: 69 / 246

3.4 Operation Tree
3
-
33
ZA 57630
(Keypad)
0 to 9
,
. key
: Numerical and decimal point keys
−
key
: Minus key
EXP key
: Exponent key (power of 10)
BS key
: Backspace key
<
,
>
key
: Move the cursor.
CANCEL key
: Discard the setting.
ENTER key
: Confirm the setting.
Top menu
[Mode]
: Set the mode.
[OSC]
: Set the measurement signal.
[FREQUENCY]
: Set the frequency.
[AMPLITUDE UNIT]
: Select the measurement signal setting unit
(voltage/current).
[AMPLITUDE]
: Set the measurement signal amplitude.
[AMPLITUDE LIMIT]
: Set the measurement signal amplitude limit.
[ALC]
: Set the automatic level control.
[ALC] :
Enable or disable.
[TOLERANCE]
: Set the permissible error.
[RETRY TIMES]
: Set the maximum number of retries.
[CORRECTION FACTOR]
: Set the control sensitivity.
[DC BIAS]
: DC bias
[DC BIAS]
: Set the DC bias.
[HV BIAS]
: Set the HV DC bias.
[OUTPUT CONNECTOR]
: Set the DC bias output connector.
[POWER AMP GAIN]
: Set the DUT drive amplifier gain.
[AUX PORT SET]
: Set the expansion connector port.
[ON/OFF SYNC]
: Turn measurement synchronous driving on or off.
[ON/OFF MODE]
: Set the ON/OFF mode.
[FREQ CHNG MODE]
: Set the phase for when the frequency changes.
[10MHz REF IN]
: Set the reference clock input.
[10MHz REF OUT]
: Set the reference clock output.