NF ZA57630, Инструкция по эксплуатации

Страница: 61 / 246

3.3 Overview of the Operation Screens
3
-
25
ZA 57630
■ Numerical settings (immediate settings)
When the function keys are displayed, tapping
[MODIFY]
enables modification of the
parameters. Move to the digit you wish to modify with the left/right key or left/right button.
The digit that can be modified is displayed highlighted.
Use the up/down key, up/down button, or knob to increase or decrease the numerical value of
the selected digit. Pressing the up key or [▲] button or turning the knob clockwise changes
the value in the order of
0 → 1 → 2 → ... 9 → 0 → 1 →
. Pressing the down key or [▼] button
or turning the knob counterclockwise changes the value in the opposite order.
The result of the change is applied immediately.
The modification operation is not possible if the setting range is exceeded.
Figure 3-23 Numerical Settings (Immediate Settings)
Press
ENTER
,
CANCEL
, or
[CLOSE]
to end the parameter modification state and display the
normal function keys. The last changed values will be applied.
■ Numerical settings (requiring confirmation)
The procedure is the same as for
“Numerical settings (immediate settings)”
above, but these
settings are not applied until you press
ENTER
or tap
[OK]
.
A range check is performed when
ENTER
is pressed or
[OK]
is tapped, and if a value is
outside of the setting range, an error message is displayed and the setting is returned to the
original one.
Pressing
CANCEL
discards the numerical value modification operations performed up until
that point in time and returns the parameter values to the original ones.
[MODIFY]
[OK]
ENTER