NF ZA57630, Инструкция по эксплуатации

Страница: 24 / 246

2.1 Checking before Use
2
-
2
ZA 57630
2.1 Checking before Use
■ Checking safety
To ensure safety, refer to
“Safety Precautions”
at the beginning of this instruction manual and
carry out safety checks before using this instrument.
In addition, read
“2.3 Grounding and Power Supply Connection”
before connecting to the power
supply and carry out sufficient safety checks before connecting this instrument to a power
source.
■ Checking appearance and accessories
If you notice something abnormal on the outside of the cardboard box (such as a scratch or
dent), closely check that the product is not affected when you remove it from the box.
When you have removed the contents from the cardboard box, check them.
If you find a scratch on the product or an accessory is missing, report the problem to NF
Corporation or its authorized agent.
○
Checking appearance
Check that there is no scratch or dent on the panel surfaces, controls, connectors, etc.
○
Checking accessories
The accessories of this instrument are as follows. Check that the quantities are correct and
there is no scratch.
Table 2-1 Packing list
*1: This is used when performing self-calibration of this instrument. For the operating
procedure, refer to “
1.8.1 Self-Calibration
” in
Instruction Manual (Advanced)
.
*2: This is used when checking the operation of this instrument in the IMPD−3T measurement mode.
For the operating procedure, refer to “
4.2.3 Impedance Measurement (Measurement Mode
IMPD−3T)
”.
Main unit ······················································································· 1
Accessories
Instruction Manual (Basics) ····························································· 1
Instruction Manual (Advanced) ························································ 1
Instruction Manual (Remote Control) ················································ 1
Power cord set (with 3-pin plug, 2 m) ················································ 1
PA−001−3234 CALIBRATION BOX
*1
··············································· 1
PA−001−3233 100 Ω RESISTOR
*2
···················································· 1