Ness D24, Инструкция по установке и программированию

Страница: 27 / 60

27
diallEr - PrOgrammiNg
D. Prog
neSS D24 Control Panel - inStallation & PrograMMing Manual
CliENT COdE
the client code is a 4 digit decimal number which identifies the panel to the
central station.
P50e
prOgraM MOde leVel:
Installer, Remote by PC
FaCtOrY deFault:
0000
tO prOgraM:
p 50e
[Client Code] e
related OptIOns:
P75xE Client Codes for Areas
OPTION No DESCRIPTION DEFAULT
P50E
P51E
P52E
P53E
Client Code
Telephone Number 1 - Primary
Telephone Number 2 - Secondary
Telephone Number 3 - Callback
P51E TElEPHONE NumbEr 1
the primary telephone number for reporting alarms to the central station.
P52E TElEPHONE NumbEr 2
the secondary telephone number for reporting alarms to the central station.
P53E TElEPHONE NumbEr 3 - CallbaCK
the callback telephone number is used by the panel when doing an upload/
download callback.
P51e, P52e, P53e
prOgraM MOde leVel:
Installer, Remote by PC
FaCtOrY deFault:
none
tO prOgraM:
p
[5xE] [Telephone number] e
nOtes:
The telephone numbers, (including special
characters), can be up to 18 digits long.
sPecIal characters (applies to all telephone numbers)
Pauses, * (star) or # (hash) (VF digits) can be included in the dialling
sequence by using the keys in the table below.
sPecIal character key entry IndIcatIon on lcd dIsPlay
PauSe (1.6sec) area Key 6 (Flashing)
* (Star) arM Key 2 (Flashing)
# (hash) Monitor Key 3 (Flashing)
sPecIal characters for telePhone nUmbers
prOgraMMIng FeedBaCK
When programming client codes and telephone numbers, the existing digits and then the new digits are
‘read back’ by flashing the numeric keypad icons 0–9.
1. Press: p [Option no] e the existing client code or phone number is displayed by the keypad.
2. Enter the new client code or phone number: [new number] e the new number will be displayed.
NOTe: After step 1, the new number can be entered immediately without waiting for the display to
finish the ‘read back’.
heX aCCOunt nuMBer
if the Client account
number is required to be
sent in hex, use this table
when programming.
(hex a cannot be used).
Hex keypad keypad
DIgIt keY Display
B VieW 11
C arM 12
D Monitor 13
e area 14
F eXCluDe 15