Ness D24, Инструкция по установке и программированию

Страница: 43 / 60

43
O P E r a T i O N
oP
neSS D24 Control Panel - inStallation & PrograMMing Manual
Most users of the panel should be assigned area Codes. an area Code allows
you to arm and Disarm only the area which has been assigned to that code. this
makes area operation as simple as possible with the least number of keystrokes.
TO arm yOur arEa
Press... [COde]
Three beeps will sound and your AREA icon will turn ON or or
leave the area within the exit Delay time. at the end of exit Delay time, 1 beep
will sound
TO diSarm yOur arEa
to Disarm the area assigned to your code, simply enter your code followed by e.
Press... [COde]
Three beeps will sound and the respective AReA icon will turn OFF or or
TO arm arEaS uSiNg aN admiNiSTraTOr COdE
using an administrator Code to arm selected areas.
Press... [COde] *
...or to Arm multiple Areas at once
and/or and/or [COde]
Three beeps will sound and the selected AREA icon/s will turn ON or or
leave the area within the exit Delay time. at the end of exit Delay time, 1 beep
will sound
TO diSarm arEaS uSiNg aN admiNiSTraTOr COdE
using an administrator Code to Disarm selected areas.
Press... [COde]
...or to Disarm multiple Areas at once
and/or and/or [COde]
Three beeps will sound and the selected AREA icon/s will turn OFF or or
...or a shortcut to Disarm all Areas
Press... [COde]
Three beeps will sound and all AReA icons will turn OFF or or