Ness D24, Инструкция по установке и программированию

Страница: 25 / 60

25
P r O g r a m m i N g
Prog
neSS D24 Control Panel - inStallation & PrograMMing Manual
CrEaTiNg iNSTallEr-dEfiNEd OuTPuT grOuPS
mETHOd 1
there are two methods for building your own output groups.
Method 1 uses the option P43uue yye, yye...etc to add outputs when building
output groups 1–15.
uu = output group 1–15, yy = output 1–16 (select 1e–16e)
this method should only be used by experienced installers as it provides no visual
feedback when programming.
tO prOgraM:
P43 [Select an output group 1–15] e [Select outputs 1–16] e ...
eXaMple:
to build output group 1 to include the outputs: output 1: Siren a,
output 3: reset, output 12: Dialler
P43 1e 1e 3e 12e
mETHOd 2
Method 2 provides a visual display of the outputs added to the selected output
group but uses 2 separate program options to add the 16 possible outputs to an
output group.
P80 uue yye
uu
= output group 1–15, yy = output 1–10 (select 1e–10e)
P81 uue yye
uu
= output group 1–15, yy = output 11–16 (select 1e–6e)
tO prOgraM:
P80 [Select an output group 1–15] e [Select outputs 1–10] e ...
P81 [Select an output group 1–15] e [Select outputs 9–16] e ...
eXaMple:
to build output group 1 to include the outputs: Siren a (output 1),
reset (output 3), Dialler (output 12).
P80 1e 1e 3e P81 1e 2e
P43xxe
prOgraM MOde leVel:
Installer, Remote by PC
FaCtOrY deFault:
[see table]
tO prOgraM:
p43
[Output Group 1–15] e [Output 1–16] e
Maps alarms to the selected output group.
nOtes:
• This method does not provide visual feedback
when programming.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
OUTPUT GROUPS
Output
P80xxE
Method 2
P43xxE
Method 1
P81xxE
SIREN A
SIREN B
RESET
STROBE
AUX 1
AUX 2 (Relay)
SONALERT
FIRE
SIREN A Burst
RESET Burst
PRE-ALARM Sonalert
DIALLER
TIMER
ALARM STATE
SIREN TONE 1
SIREN TONE 2 1 1E 1E
1E
2 2E 2E
2E
3 3E 3E
3E
4 4E 4E
4E
5 5E 5E
5E
6 6E 6E
6E
7 7E 7E
8 8E 8E
9 9E 9E
10 10E 10E
11E
12E
13E
14E
15E
16E
11
12
13
14
15
16
INSTALLER DEFINED
P80xxe, P81xxe
prOgraM MOde leVel:
Installer, Remote by PC
FaCtOrY deFault:
[see table]
tO prOgraM:
p80
[Output Group 1–15] e [Output 1–10] e
p81 [Output Group 1–15] e [Output 9–16] e
Maps alarms to the selected output group.
nOtes:
• This method provides visual feedback when
programming.