Motorola HT 1000, Руководство пользователя

Страница: 132 / 205

126
DTMF Inter-Digit Delay Enter a value directly or use the UP/DOWN arrow keys to make your
selection. The time period that carrier or carrier with PL (if on a PL
channel) will be transmitted between DTMF digits during auto dial.
The valid range is 4.12 to 1050.6 ms in 4.12-ms increments. A value of
zero is not allowed.
The default is 103 ms.
DTMF Access Code Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the code used to access fixed end telephone
interconnect equipment. Some conventional interconnect systems
require a “*” to access the telephone line. Other systems require a
multi-digit access code which consists of one to four digits and may or
may not contain a “*”. Multi-digit access codes are used to prevent
unauthorized access to the telephone interconnect system.
DTMF De-Access Code Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the code that causes the telephone interconnect
equipment to release the phone connection. It may contain any legal
DTMF digit. Release codes are used to improve system loading by
eliminating dead air time after interconnect calls are completed.