Moog DS2110, Инструкция по установке и эксплуатации

Страница: 175 / 312

CHAPTER 5.0 Functional Overview 5-53
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
5.12.2 Faults and User Indication in the DS2110
This section outlines the user indication that is present on the DS2110. The drive will, depending on its state,
indicate via the 7-segment display, various messages to the user. These messages generally reflect the state of
operation of the drive and any faults that may be present.
The DS2110 distinguishes between faults and warnings. Faults are those abnormal conditions that are of a
serious enough consequence to cause the DS2110 to halt operation. This will always result in removal of power
from the DS2110 high power amplifier, and will usually result in application of a motor brake, if present.
Warnings are those abnormal conditions that do not in themselves yet constitute a peril to the equipment or to
personnel.
Display Status Description
0 Logic voltage applied, High voltage applied. No faults
present. Drive ready to be enabled
I Drive Enabled
U*( Table 5.42) * Warning state & No faults present
F* (Table 5.43) Fault on drive
Table 5.41 7-Segment Display Indication