Moog DS2110, Инструкция по установке и эксплуатации

Страница: 16 / 312

CHAPTER 2.0 Safety & EMC Instructions 2-1
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
2.1 General
This user’s manual is intended to provide sufficient information on how to install Moog DS2110 electric
motor systems. Section 2.2 covers Safety and System Safeguards. Section 2.3 covers Electromagnetic
Compatibility (EMC). This user’s guide must be read and understood before applying power and
operating the equipment described.
This equipment must be installed and serviced only by duly qualified service personnel. All information
in this manual is directed towards such persons only. Individuals responsible for the installation of the
equipment described in this user’s guide must ensure;
1) only technically qualified individuals are employed to work on the installation,
2) these qualified individuals must have the accompanying documentation available at all times when
working on the installation and are obliged to use this documentation in a consistent manner, and
3) work on, or close to, the installation is prohibited for non-technically qualified individuals
Throughout this user’s guide may be found NOTES, CAUTIONS, and WARNINGS and CE-
Compliance-Required. They are defined as follows:
The DS2110 controller contains potentially lethal voltages. Extreme caution shall be observed whenever the
equipment is in operation. Incorrect installation of the motor or the controller may cause damage to the
equipment, serious personal injury or death. Consequently, the instructions in this user’s manual, as well as
national and local rules and safety regulations must be complied with.
Required for
CE-Compliance
NOTES are general in nature and are intended to
emphasise information.
CAUTIONS are to alert personnel to actions that could
cause equipment damage, resulting in the equipment
becoming unsafe.
WARNINGS serve to make personnel aware of potentially
hazardous actions that may result in personal injury or death.
CE-Compliance indicates where a particular application-related
safety or EMC requirement is driven by the need for CE-
Compliance of the DS2110 when installed in the system.
Customers who do not need CE-Compliance on their machinery
may choose not to implement these features.