Mitsubishi MOTORS PAJERO SPORT Скачать руководство пользователя страница 84

Страница: 84 / 416

Making a flat seat

Seat and seat belts

4-13

1. Fasten the cover to the seatback with the

band (E).

2. Pull the seatback lock release band (B),

then raise the seatback until it locks
securely into place.
Push lightly on the seatback to confirm
that it has actually been secured.

3. Lift the seat cushion backward. Fold the

stand (C) and then gently lower the seat
cushion.

4. Push the seat cushion until you hear a

“click” and the seat locks securely.

E00404302130

By removing the head restraints and fully
reclining the seatbacks of the seats, one large
flat seat is achieved.

To return

Making a flat seat

WARNING



Never drive with passengers on the flat
seat. This is highly dangerous.

CAUTION



To make a flat seat, stop the vehicle in a safe
place.



Make sure the seat is adjusted by an adult or
with adult supervision for correct and safe
operation.



Do not walk around on top of the seats after
they have been laid flat.

Содержание PAJERO SPORT

































































































































































































































































































































































































































Результаты поиска

Содержание PAJERO SPORT

Отзывы:

Похожие инструкции для PAJERO SPORT

Бренды по названию

Популярные бренды

Mitsubishi MOTORS PAJERO SPORT, Руководство пользователя

Результаты поиска

Содержание PAJERO SPORT

Отзывы:

Похожие инструкции для PAJERO SPORT

Бренды по названию

Популярные бренды