Keyless operation system
3-10
Locking and unlocking
3
Operation can be confirmed as shown below.
However, the room lamp will illuminate only
if the room lamp switch is in the “
” or the
“DOOR” position.
E00306000165
E00307201637
The emergency key (A) can only be used to
lock and unlock the door. To use the emer-
gency key, unlock the lock knob (B) and
remove it from the keyless operation key (C).
Turning the emergency key in the forward
direction locks the door, and turning it in the
rear direction unlocks the door. Also refer to
“Locking and unlocking: Doors” on page
3-14.
Operation confirmation when locking
and unlocking
When locking: The turn-signal lamps blink
once and the outer buzzer
sounds once.
When unlock-
ing:
The room lamp illuminates
for approximately 15 sec-
onds, the turn-signal lamps
blink twice, and the outer
buzzer sounds twice.
NOTE
Functions can be modified as stated below.
For further information, please contact an
authorised MITSUBISHI MOTORS dealer.
• Activating the operation confirmation func-
tion (blinking of the turn-signal lamps) only
during locking, or only during unlocking.
• Disabling the operation confirmation func-
tion (blinking of the turn-signal lamps) and
outer buzzer.
• Changing the number of blinks for the
operation confirmation function (blinking
of the turn-signal lamps).
To lock/unlock without using
the keyless operation function
Emergency key
NOTE
Only use the emergency key for emergen-
cies. If the keyless operation key battery
wears out, replace it as quickly as possible so
that you can use the keyless operation key.
The emergency key is built in the keyless
operation key.
After using the emergency key, always return
it into the original position.
Locking and unlocking the door
1- Lock
2- Unlock
