Electric window control
3-34
Locking and unlocking
3
E00302402165
The door windows can be opened or closed
for 30 seconds after the engine is stopped.
However, once the driver’s door or the front
passenger’s door is opened, the windows can-
not be operated.
E00302502456
When the door window is automatically
closed by pulling up the switch fully, if a
hand or head is trapped in the closing win-
dow, it will lower automatically.
Nonetheless, make sure that nobody puts
their head or hand out of the window when
closing a window.
The lowered window will become operational
after a few seconds.
1- Lock
2- Unlock
WARNING
A child may tamper with the switch at the
risk of its hands or head being trapped in
the window. When driving with a child in
the vehicle, please press the window lock
switch to disable the passenger’s switches.
Timer function
Safety mechanism
WARNING
If the battery terminals are disconnected
or the fuse for electric window is replaced,
the safety mechanism will be cancelled.
If a hand or head got trapped, a serious
injury could result.
CAUTION
The safety mechanism is cancelled just
before the window is fully closed. This
allows the window to close completely.
Therefore be especially careful that no fin-
gers are trapped in the window.
The safety mechanism is deactivated while
the switch is pulled up. Therefore be espe-
cially careful that fingers are not trapped in
the door window opening.
NOTE
The safety mechanism can be activated if the
driving conditions or other circumstances
cause the door windows to be subjected to a
physical shock similar to that caused by a
trapped hand or head.
If the following operation is performed, the
safety mechanism will be cancelled and the
door window will not automatically
open/close completely.
• When the battery terminals are discon-
nected.
• When the fuse for electric window is
replaced.
• When the safety mechanism is activated
five or more times consecutively.
In such a case, the following procedure
should be implemented to rectify this situa-
tion.
If the window is open, repeatedly raise the
appropriate window switch until that win-
dow has been fully closed. Following this,
release the switch, raise the switch once
again and hold it in this condition for at least
1 second, then release it. You should now be
able to operate door window in the normal
fashion.
