Adaptive Cruise Control System (ACC)*
6-78
Starting and driving
6
There are two ways to decrease the set speed.
The set speed decreases by 1 km/h every time
you push down the “SET -” switch while the
ACC control is working. If you hold the
switch pushed down, the set speed decreases
in increments of 5 km/h.
The ACC control at the original set speed
resumes as soon as you release the accelera-
tor pedal. Under certain conditions, however,
the braking control and alarming functions of
the ACC may not work for a short while after
releasing the accelerator pedal.
Set speed adjustment is impossible while the
accelerator pedal is in a depressed position.
To decrease the set speed
NOTE
By using the “SET -” switch:
Type 1
Type 2
NOTE
There is some time lag between the setting to
a new speed and actually decelerating to that
speed.
If there is a vehicle in front and your vehicle
is following that vehicle at a speed lower
than the set speed, the set speed alone
decreases with no actual deceleration taking
place.
CAUTION
The setting speed should be set up the suita-
ble speed according to a situation.
