Tyre repair kit
For emergencies
8-11
8
11. After injecting the sealant, pull the hose
off the valve, remove any residual sealant
from the valve, rim and/or tyre. Fit the
valve insert (F) into the valve (D), and
screw the valve insert securely into place
using the valve remover (E).
12. After injecting the sealant, securely fit the
valve remover (E) into the end of the filler
hose (J) to prevent sealant from leaking
from the empty bottle.
13. Pull out the compressor hose (K) from the
side of the tyre compressor, and then
securely attach the hose to the tyre valve
(D).
14. Place the compressor (L) with its air pres-
sure gauge (M) on top.
Pull out the compressor’s power cord (N),
insert the plug on the cord into the acces-
sory socket (O), and then put the opera-
tion mode of the power switch in ACC.
(Refer to “Accessory socket” on page
7-16.)
Turn ON the compressor switch (P) and
inflate the tyre to the specified pressure.
(Refer to “Tyre inflation pressures” on
page 10-11.)
NOTE
When removing and screwing in the valve
insert using the valve remover, turn the valve
remover by hand. Using a tool to turn the
valve remover could damage it.
