Mitsubishi MOTORS PAJERO SPORT, Руководство пользователя

Страница: 122 / 416

Instruments - Type A
Instruments and controls 5-11
5
The reset mode conditions for the average
fuel consumption display can be switched
between “Auto reset” and “Manual reset”.
Refer to “Changing the reset mode for aver-
age fuel consumption and average speed” on
page 5-13.
For information on how to change the aver-
age fuel consumption display setting, refer to
“Changing the function settings” on page
5-12.
E00572600049
This displays the average speed from the last
reset to the present time.
The reset mode conditions for the average
speed display can be switched between “Auto
reset” and “Manual reset”.
Refer to “Changing the reset mode for aver-
age fuel consumption and average speed” on
page 5-13.
For the method for changing the average
speed display setting, refer to “Changing the
function settings” on page 5-12.
E00572700040
While driving, this displays the momentary
fuel consumption, using a bar graph.
The “ ” mark (A) in the momentary fuel
gauge shows the average fuel consumption.
When the momentary fuel consumption sur-
passes the average fuel consumption, the
NOTE
 The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
 “---” is displayed when the average fuel con-
sumption cannot be measured.
 The initial (default) setting is “Auto reset
mode”.
 The average fuel consumption will depend
on the driving conditions (road conditions,
how you drive, etc.). The displayed fuel con-
sumption may vary from the actual fuel con-
sumption. Treat the fuel consumption
displayed as just a rough guideline.
 The memory of the auto reset mode or man-
ual reset mode for the average fuel consump-
tion display is erased if the battery is
disconnected.

The display setting can be changed to the
preferred units {km/L, mpg (US), mpg (UK)
or L/100 km}.
Refer to “Changing the function settings” on
page 5-12.
Average speed display
NOTE NOTE
 The average speed display can be reset sepa-
rately for the auto reset mode and for the
manual reset mode.

“---” is displayed when the average speed
cannot be measured.
 The initial (default) setting is “Auto reset
mode”.

The display setting can be changed to the
preferred units (km/h or mph).
Refer to “Changing the function settings” on
page 5-12.
 The memory of the auto reset mode or man-
ual reset mode for the average speed display
is erased if the battery is disconnected.
Momentary fuel consumption dis-
play
A