Wiper blade rubber replacement
10-14 Maintenance
10
E01008201410
1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A)
disengages from the hook (B). Pull the
wiper blade further to remove it.
3. Attach the retainers (C) to a new wiper
blade.
Refer to the illustration to ensure that the
retainers are correctly aligned as you
attach them.
4. Insert the wiper blade into the arm, start-
ing with the opposite end of the blade
from the stopper. Make sure the hook (B)
is fitted correctly in the grooves in the
blade.
5. Push the wiper blade until the hook (B)
engages securely with the stopper (A).
An aluminium wheel can be damaged by a
tyre chain while driving. When fitting a tyre
chain on an aluminium wheel, take care that
any part of the chain and fitting cannot be
brought into contact with the wheel.
When installing or removing a tyre chain,
take care that hands and other parts of your
body are not injured by the sharp edges of
the vehicle body.
Install the chains only on the rear tyres and
tighten them as tightly as possible with the
ends securely fastened.
Wiper blade rubber replace-
ment
Windscreen wiper blades
CAUTION
NOTE
Do not allow the wiper arm to fall onto the
windscreen. This could damage the glass.
NOTE
If retainers are not supplied with the new
wiper blade, use the retainers from the old
blade.
