Instruments - Type B
5-46
Instruments and controls
5
E00570600061
This displays the average fuel consumption
from the last reset to the present time.
There are 2 types of mode settings of [1]
automatic reset and [2] manual reset.
Refer to “Changing the reset mode for aver-
age fuel consumption and average speed” on
page 5-41.
For information on how to change the aver-
age fuel consumption display setting, refer to
“Function setting display” on page 5-38.
E00572600052
This displays the average speed from the last
reset to the present time.
There are 2 types of mode settings of [1]
automatic reset and [2] manual reset.
Refer to “Changing the reset mode for aver-
age fuel consumption and average speed” on
page 5-41.
For the method for changing the average
speed display setting, refer to “Function set-
ting display” on page 5-38.
NOTE
The driving range is determined based on the
fuel consumption data. This may vary
depending on the driving conditions and hab-
its. Treat the distance displayed as just a
rough guideline.
When you refuel, the driving range display is
updated. However, if you only add a small
amount of fuel, the correct value will not be
displayed. Fill with a full tank whenever pos-
sible.
On rare occasions, the value displayed for
the driving range may change if you are
parked on an extremely steep incline. This is
due to the movement of fuel in the tank and
does not indicate any malfunction.
The display setting can be changed to the
preferred units (km or miles).
Refer to “Function setting display” on page
5-38.
Average fuel consumption display
NOTE
The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
“---” is displayed when the average fuel con-
sumption cannot be measured.
The initial (default) setting is “Auto reset
mode”.
The average fuel consumption will depend
on the driving conditions (road conditions,
how you drive, etc.). The displayed fuel con-
sumption may vary from the actual fuel con-
sumption. Treat the fuel consumption
displayed as just a rough guideline.
The memory of the auto reset mode or man-
ual reset mode for the average fuel consump-
tion display is erased if the battery is
disconnected.
The display setting can be changed to the
preferred units {km/L, mpg (US), mpg (UK)
or L/100 km}.
Refer to “Function setting display” on page
5-38.
Average speed display
NOTE
The average speed display can be reset sepa-
rately for the auto reset mode and for the
manual reset mode.
“---” is displayed when the average speed
cannot be measured.
The initial (default) setting is “Auto reset
mode”.
The display setting can be changed to the
preferred units (km/h or mph).
Refer to “Function setting display” on page
5-38.