Adaptive Cruise Control System (ACC)*
Starting and driving
6-79
6
If you depress the brake pedal while the ACC
control is working, the control is cancelled,
allowing you to decelerate the vehicle.
At the point where the vehicle slows down to
your desired speed, push down the “SET -”
switch; the new speed is then set in the sys-
tem.
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle.
E00638200349
You can cancel the ACC control by using
either of the methods below.
When the control is cancelled, the system is
placed in the ‘standby state’. You can make
the system restart the control by using the
“SET -” or “RES +” switch if the conditions
for activating the control are met.
Press the “CANCEL” switch.
Depress the brake pedal.
By using the brake pedal:
Type 1
Type 2
NOTE
The ACC control is cancelled if you depress
the brake pedal and the ACC control does
not resume even when you release the pedal.
To temporarily accelerate the vehi-
cle
CAUTION
The ACC braking control and proximity
alarm functions will not work while the
accelerator pedal is depressed.
The setting speed should be set up the suita-
ble speed according to a situation.
NOTE
The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed.
In certain conditions, the braking control and
alarming functions of the ACC may not work
for a short while after releasing the accelera-
tor pedal.
Set speed adjustment is impossible while the
accelerator pedal is in a depressed position.
To terminate ACC control
To cancel of ACC control
