Instruments - Type B
5-38
Instruments and controls
5
: Up/Down switch
E00578100033
“Display type”, “Sub unit speedometer”,
“Driver assistance”, “Pop-up display”, “Rest
reminder”, “Turn-signal sound”, “Operation
sound”, “Language”, “Unit”, “Reset mode”,
“Factory mode”, etc. can be changed to the
setting of your choice.
Please follow the procedure below.
1. Stop the vehicle in a safe place. Firmly
apply the parking brake and put the selec-
tor lever into the “P” (PARK) position.
2. Change to the multi-mode screen, press
the Left switch or Right switch, select the
function setting display from the multi
information screen and press the Enter
switch. Refer to “Multi information
screen” on page 5-35.
3. Press the Up/Down switch to select the
desired setting item, then press the Enter
switch to change to each setting screen.
Please read each item about detailed set-
ting method.
Refer to “Changing the display type set-
ting” on page 5-39.
Refer to “Changing the sub unit speedom-
eter is displayed” on page 5-39.
Refer to “Blind Spot Warning (BSW)
(with Lane Change Assist): To operate”
on page 6-98.
Refer to “Changing the remote device set-
ting” on page 2-9.
Refer to “Changing the pop-up display
setting” on page 5-39.
Refer to “Switching automatic operation
of the electric tailgate ON/OFF” on page
3-26.
Refer to “To operate the nanoe™” on
page 7-13.
Refer to “Changing the time until “REST
REMINDER” is displayed” on page 5-39.
Refer to “Changing the turn-signal sound”
on page 5-40.
Refer to “Operation sound setting” on
page 5-40.
Refer to “Changing the display language”
on page 5-40.
Refer to “Changing the fuel consumption
display unit and the temperature unit” on
page 5-40.
Refer to “Changing the reset mode for
average fuel consumption and average
speed” on page 5-41.
Refer to “Returning to the factory set-
tings” on page 5-42.
1-When warning has not occurred
2-When a warning occurs
3-When a warning occurs
NOTE
When multiple warnings occur simultane-
ously, all warnings can be displayed by using
the Up/Down switch.
Function setting display
CAUTION
For safety, stop the vehicle before operating.
You can not change the setting while driving.
NOTE
To return menu screen to the function setting
display, press the Back switch.
If the battery is disconnected, these function
setting are reset from memory and is auto-
matically to the factory settings (except the
“Driver assistance”, “Remote”, “Tailgate”,
“nanoe™”, “Turn-signal sound” settings).
