Instruments - Type A
5-16
Instruments and controls
5
E00573200039
The time until the display appears can be
changed.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 5-12.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest time
setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
display “ALARM”.
4. Lightly press the multi information dis-
play switch to select the time until the dis-
play.
5. Press and hold the multi information dis-
play switch for about 2 seconds or more,
the setting is changed to the selected time.
E00573300030
It is possible to change the turn-signal sound.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 5-12.
2. Lightly press the multi information dis-
play switch to select
(changing the
turn-signal sound).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from 1 (turn-signal sound 1) to 2
(turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn-
signal sound.
E00573400031
It is possible to change the bar graph setting
of the momentary fuel consumption display.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 5-12.
2. Lightly press the multi information dis-
play switch to select
(changing
the momentary fuel consumption display).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from ON (with the green bar
graph) to OFF (without the green bar
graph), or from OFF to ON.
The setting changes to the selected bar
graph setting.
E00573500032
Many of the function settings can be returned
to their factory settings.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
Refer to “Changing the function settings”
on page 5-12.
2. Lightly press the multi information dis-
play switch to select “RESET” (returning
to the factory settings).
NOTE
The operation sound setting only deactivates
the operation sound of the multi information
display switch and rheostat illumination but-
ton. The warning display and other sounds
cannot be deactivated.
Changing the time until “REST
REMINDER” is displayed
NOTE
The drive time is reset when the operation
mode is put in OFF.
Changing the turn-signal sound
Changing the momentary fuel con-
sumption display
Returning to the factory settings
