Keyless operation system
3-6
Locking and unlocking
3
3. Remove the used battery.
4. Install a new battery with the + side (A)
up.
5. Close the key case firmly.
6. Install the emergency key removed in step
1.
7. Check the keyless entry system to see that
it works.
E00305602650
The keyless operation system allows you to
lock and unlock the doors and the tailgate,
start the engine and change the operation
mode simply by carrying the keyless opera-
tion key with you.
The switches on the keyless operation key
can also be used as the key switch of keyless
entry system.
Refer to “Starting and stopping the engine”
on page 6-18.
Refer to “Keyless entry system” on page 3-3.
The driver should always carry the keyless
operation key. This key is necessary for lock-
ing and unlocking the doors and the tailgate,
starting the engine and otherwise operating
the vehicle, so before locking and leaving the
vehicle, be sure to check that you have the
keyless operation key.
NOTE
Be sure to perform the procedure with the
MITSUBISHI mark facing you. If the
MITSUBISHI mark is not facing you when
you open the key case, the switches may
come out.
+ side
- side
Coin type
battery
CR2032
Keyless operation system
WARNING
People with implantable cardiac pacemak-
ers or implantable cardiovascular-defi-
brillators should not go near the exterior
transmitters (A) or the interior transmit-
ters (B). The radio waves used by the key-
less operation system could adversely
affect implantable cardiac pacemakers or
implantable cardiovascular-defibrillators.
