Rear-view camera*
6-112 Starting and driving
6
The reference lines for distance and vehicle
width are based on a level, flat road surface.
In the following cases, errors are produced
between the display reference lines and the
distance on the actual road surface.
The reference lines are displayed closer than
the actual distance.
Therefore when there is an obstacle on the
upward slope, it appears farther than its actual
position.
The reference lines are displayed closer than
the actual distance.
Therefore when there is an obstacle on the
upward slope, it appears farther than its actual
position.
The reference lines are displayed farther than
the actual distance.
1: Approximately at the rear edge of the
rear bumper (if so equipped)
2: Approximately 100 cm
3: Approximately 200 cm
CAUTION
Due to the number of people in the vehicle,
the fuel quantity, the weight and positioning
of luggage, and/or the condition of the road
surface, the lines in the view from the rear-
view camera may not be accurately posi-
tioned relative to the actual road.
Use the reference lines only as a guideline,
and always do a safety check of your behind
and surroundings directly while driving.
Errors between the display and
the actual road surface
When the rear of the vehicle is
weighed down with the weight of
passengers and luggage in the vehi-
cle
A: Actual objects
B: Objects shown on the screen
When there is an upward slope
behind the vehicle
A: Actual objects
B: Objects shown on the screen
When there is a downward slope
behind the vehicle
