Cruise control*
Starting and driving
6-65
6
2. Accelerate or decelerate to your desired
speed, then push down and release the
SET - switch (B) when the indicator dis-
play is illuminated. The vehicle will then
maintain the desired speed. The “SET”
indicator appears on the information dis-
play in the meter cluster.
E00609402082
There are 2 ways to increase the set speed.
Push up and hold the “RES +” switch (C)
while driving at the set speed, and your speed
will then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the “RES +” switch (C) for less than
approximately 1 second and release it.
Each time you push up the “RES +” switch
(C), your vehicle will go approximately
1.6 km/h faster.
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the “SET -” switch (B) and
release the switch momentarily to set a new
desired cruising speed.
Type 1
Type 2
NOTE
When you release the “SET -” switch (B),
the vehicle speed will be set.
To increase the set speed
RES + switch
Type 1
Accelerator pedal
Type 2
