Mitsubishi Electric MR-JE-C, Инструкция по эксплуатации

Страница: 15 / 312

1. FUNCTIONS AND CONFIGURATION
1 - 2
1.1 Positioning mode specification list
Only the specifications of the positioning mode are listed here. For the other specifications, refer to section
1.3 of "MR-JE-_C Servo Amplifier Instruction Manual".
Item Description
Servo amplifier model MR-JE-_C
Positioning mode
Command method
Point table
Operational specifications
Positioning with specification of point table No.
(When using objects/registers: 255 points, when assigning input signals: 15 points) (Note 2) (Note 3)
Position
command
input
(Note 1)
Absolute
value
command
method
Set in the point table.
Setting range of feed length per point: -999999 to 999999 [×10
STM
µm],
-99.9999 to 99.9999 [×10 STM inch], -999999 to 999999 [pulse]
Incremental
value
command
method
Set in the point table.
Setting range of feed length per point: 0 to 999999 [×10 STM µm],
0 to 99.9999 [×10 STM inch], 0 to 999999 [pulse]
Speed command input
Set the acceleration/deceleration time constants in the point table.
Set the S-pattern acceleration/deceleration time constants with
[Pr. PC03 S-pattern acceleration/deceleration time constant].
System Signed absolute value command method/incremental value command method
Analog override 0 V DC to ±10 V DC/0% to 200%
Torque limit Set with external analog input, parameters or objects/registers (0 V DC to ±10 V DC/maximum torque).
Position command data input
Communication
Position command input (Note 1)
Absolute value command method
Set position command data with objects/registers.
Setting range of feed length per point: -999999 to 999999 [×10 STM µm],
-99.9999 to 99.9999 [×10 STM inch], -999999 to 999999 [pulse]
Incremental value command method
Set position command data with objects/registers.
Setting range of feed length per point: 0 to 999999 [×10 STM µm],
0 to 99.9999 [×10 STM inch], 0 to 999999 [pulse]
Speed
command
input
Selects the rotation speed and acceleration/deceleration time constant by network.
Set the S-pattern acceleration/deceleration time constants with [Pr. PC03].
System Signed absolute value command method/incremental value command method
Indexer
Operational specifications
Positioning by specifying the station position
(When using objects/registers: 255 points, when assigning input signals: 16 points) (Note 3)
Speed command input Selects the rotation speed and acceleration/deceleration time constant by input signals or objects/registers.
System Rotation direction specifying indexer/shortest rotating indexer
Digital override Selects the override multiplying factor by input signals or objects/registers.
Torque limit Set with external analog input, parameters or objects/registers (0 V DC to ±10 V DC/maximum torque).
Operation mode
Automatic operation mode
Point
table
Each
positioning
operation
Point table No. input method
Operates each positioning based on a position command and a speed command.
Automatic
continuous
positioning
operation
Varying-speed operation (2 to 255 speeds)/automatic continuous positioning operation (2 to 255 points)/
Automatic continuous operation to a point table selected at startup/automatic continuous operation to the
point table No. 1
Indexer
Rotation
direction
specifying
indexer
Positioning to the specified station. Rotation direction settable
Shortest
rotating indexer
Positioning to the specified station. Rotates in the shorter direction from the current position.
Manual operation mode
Point
table
Jog operation
Executes an inching operation with the external input signal or communication function,
based on the speed command set with parameters or objects/registers.
Manual pulse
generator
operation
Manual feeding is executed with a manual pulse generator.
Command pulse multiplication: select from ×1, ×10, and ×100 with a parameter.
Indexer
Jog operation Decelerates to a stop regardless of the station.
Station JOG
operation
Rotates in a direction specified by the rotation direction decision when the start signal turns on.
Positions to the nearest station where the servo motor can decelerate to a stop when the start signal turns off.