Mitsubishi Electric MR-J4-_GF, Инструкция по эксплуатации

Страница: 211 / 274

9. MANUFACTURER FUNCTIONS
9 - 26
(2) Setting example
When the sheet length is 200.0 mm, the circumferential length of the rotary knife axis (synchronous axis
length) is 600.0 mm, and the sheet synchronous width is 10.0 mm, set the following items as follows.
Cam axis one cycle
current value
Sheet feeding
(0.0 mm)
180°
(100.0 mm)
360°
(200.0 mm)
Home position
0°
t
t
t
(5.0 mm) (5.0 mm)
Rotary knife axis (cam axis)
speed
Cam stroke ratio
(Cam data
created by
users)
0°
Synchronous speed
(Sheet feed speed)
Sheet length
(200.0 mm)
Sheet synchronous width
(10.0 mm)
Cycle length of the rotary
knife axis
(600.0 mm)
Rotary
knife axis
(Cam axis)
Sheet length
(200.0 mm)
100%
(600.0 mm)
Basic settings required to use the simple cam
function
Item Setting Setting
value
Operation mode
selection ([Pr.
PA01]) Select "Point table
method". "1000"
Simple cam
function setting
([Pr. PT35]) Enable the simple cam
function. "_ 1 _ _"
When the conveyor axis (main axis) feeds a
sheet by the set length, the rotary knife makes
one rotation (600 mm) to cut the sheet. Set the
following items as follows.
Item Setting Setting
value
Cam axis length
per cycle ([Cam
control data No.
48]) Set the sheet length. 200.000
Cam stroke
amount ([Cam
control data No.
51]) Set the rotation amount
per rotation in "µm". 600000
Synchronous
encoder axis unit
([Cam control
data No. 14]) Set the unit of the sheet
length. 0 (mm)
Unit of rotary
knife axis ([Pr.
PT01]) Set "mm" as the unit of
position data. "_ 0 _ _"
Cam data Create the cam data with
the operation pattern
shown in the left figure.
Set the following items as follows to use the
encoder following function.
Item Setting Setting
value
Main shaft input
axis selection
([Cam control
data No. 30]) Select the synchronous
encoder axis. 2
Synchronous
encoder axis unit
multiplication
numerator ([Cam
control data No.
15]) Refer to the synchronous
encoder axis unit
conversion gear setting in
section 9.5.7 (4) (b). Refer to
section
9.5.7 (4)
(b).
Synchronous
encoder axis unit
multiplication
denominator
([Cam control
data No. 16])